Graham Farish Prairie Tank DCC Conversion

Mistakes may damage your locomotive, controller or other accessories. Use a multimeter to make absolutely sure you have completely isolated the motor from the track before testing. Always use the Programming Track for testing. Our guides are provided for reference only, and you proceed entirely at your own risk. Unsure about something - try our DCC Conversion Service instead.

This conversion follows the Graham Farish insulating bush (Digihat) method to isolate the lower motor connection from the chassis. The chassis is quite compact, and there isn't much room inside the body, but if you use one of the very small decoders, it will just fit inside the roof area at the back. If you don't mind being able to see the decoder in the cab, there is plenty of room for it there too.

Models covered by this guide:

• Prairie Tank in GWR green (1604)

Our DCC Conversion Service